What characteristics do garment interlining non-woven fabrics need to have?

May.12.2022

At present, the non-woven products used in the clothing field mainly include clothing linings, thermal fillers, underwear, clothing fabrics, Color crepe paper

etc., among which the output and consumption of linings and fillers are the largest. Most of these products are durable products.

Clothing made of non-woven fabrics is mainly concentrated in the field of medical clothing and protective clothing, but has not been widely used in the field of civilian clothing. In recent years, the development of the clothing field mainly includes women's disposable underwear and outerwear, coats, jackets, sportswear, etc. Underwear is mainly made of viscose, polypropylene or polypropylene fibers by thermal bonding and puncturing.

The product is mainly used for going out, traveling and other occasions. It can be discarded once without washing, and it is hygienic and convenient. The non-woven outerwear that has entered the market in recent years mainly includes sewing and knitting outerwear, needle-punched children's clothing, coats, jackets made of flash non-woven fabrics, sportswear, travel wear, hats, etc.

Next, we will focus on the knowledge points of non-woven fabrics as clothing interlinings.

Adhesive lining refers to the lining cloth formed by uniformly coating hot melt adhesive on the base cloth. It can be bonded to the fabric under certain heating and pressure conditions, so as to play the role of reinforcement and shape retention. Commonly used adhesive lining fabrics are woven fabrics, knitted fabrics and non-woven fabrics. Adhesive linings based on non-woven fabrics have the advantages of light weight and low price, good conformability and shape retention, and excellent softness, moisture permeability and air permeability. At present, the amount of non-woven fabric adhesive village has accounted for more than 60% of the adhesive interlining used in clothing.

The processing process of non-woven fabric bonding village is divided into three parts, namely the production of non-woven bonding lining fabric, the selection of hot melt adhesive and coating processing. Depending on the type of clothing, the material of the fabric and the parts used, there are also different requirements for the bonding base cloth, the type of hot melt adhesive and the coating method.